http://www.depicus.com/wake-on-lan/wake-on-lan-cmd.aspx
The command line tool wolcmd is run from a dos prompt. The syntax is as follows:
wolcmd [mac address] [ip address] [subnet mask] [port number]
you can also do a local broadcast if you are running on an internal network thus
wolcmd [macaddress] 255.255.255.255 255.255.255.255
where mac address is the unique address of the network card. To find the mac address of a card you can either open the computer and read the address on the sticker on the card or much easier is, if you are using TCP/IP, ping the machine from a dos prompt (ping [machine name or ip number] i.e. ping delphi or ping 10.43.43.43) then issue an arp command (arp -a) which will list the ip number and physical address of the card.
If the port number is not specified it will default to port 7
沒有留言:
張貼留言